NCP1124AP65G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 27W |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| JESD-30 Code | R-PDIP-T7 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 20V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Voltage - Supply (Vcc/Vdd) | 8.5V~35V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | 65kHz |
| Rise Time | 4.25ns |
| Fall Time (Typ) | 9.32 ns |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 82 % |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 650V |
| Voltage - Start Up | 17V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1124AP65G Overview
An embedded ac to dc converter is included in 8-DIP (0.300, 7.62mm), 7 Leads package.In Tube case, the ac dc converter is available.There is a AC/DC converter mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.Analog ICs of type ANALOG CIRCUIT are used in this AC DC converter.As a result, the switching frequency reaches 65kHz .As long as the supply voltage (Vcc/Vdd) is within the range of 8.5V~35V , the AC/DC converter may be used.In total, there are 7 terminations.It are possible to mount thare ac dc converters by Through Hole .The ac to dc conversions can be found in Switching Regulator or Controllers .It is possible to supply the ac to dc inverter with a maximum current of 1A .It is possible for the interface IC to conduct when the supply voltage is 20V .
NCP1124AP65G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 65kHz
Operating Supply Voltage at the range of 20V
NCP1124AP65G Applications
There are a lot of ON Semiconductor NCP1124AP65G AC DC Converters applications.
- Low power ac?dc Adapters for Chargers
- Z-Wave
- Laptops and personal digital assistants
- Standby Power for General Off-Line Applications
- Auxiliary Power Supply
- Appliance Power Supplies
- Power Adaptors
- Humidifier
- Air Conditioning
- Home Appliance Applications
