NCP1126AP100G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 32W |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Pin Count | 7 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 20V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Voltage - Supply (Vcc/Vdd) | 8.5V~35V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Rise Time | 7.44ns |
| Fall Time (Typ) | 5.94 ns |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 82 % |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 650V |
| Voltage - Start Up | 17V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1126AP100G Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .There is a AC/DC power converter of Tube available.There is a mounting point for this AC/DC converter in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.In this AC DC converter, an analog integrated circuit (IC) of type ANALOG CIRCUIT is employed.100kHz is the switching frequency.The AC/DC converter is capable of being used when the supply voltage is 8.5V~35V (Vcc/Vdd).Total terminations are 7 .In this ac/dc converter, there are 7 pins.A total of 7 pins are present on the ac-dc converter.Through Hole is a suitable mounting point for the ac dc converters.The ac to dc conversions are included in Switching Regulator or Controllers .It is possible for the interface IC to conduct when the supply voltage is 20V .
NCP1126AP100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
Operating Supply Voltage at the range of 20V
NCP1126AP100G Applications
There are a lot of ON Semiconductor NCP1126AP100G AC DC Converters applications.
- Home appliances
- Air Conditioning
- Set Top Boxes (STB)
- Standby Power Supplies
- Smartphones
- Standby power supplies for VCR
- MPS parts
- AC/DC Adaptors/Chargers for E-books
- Networking
- Power tools
