NCP1126AP65G
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Terminal Finish | Tin (Sn) |
| Power (Watts) | 32W |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Base Part Number | NCP1126 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Output Type | Fixed |
| Polarity | Positive |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 2.1mA |
| Power Dissipation | 1.5W |
| Voltage - Supply (Vcc/Vdd) | 8.5V~35V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Halogen Free | Halogen Free |
| Rise Time | 7.44ns |
| Fall Time (Typ) | 5.94 ns |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 84 % |
| Input Bias Current | 20nA |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 650V |
| Voltage - Start Up | 17V |
| Height | 4.953mm |
| Length | 10.16mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1126AP65G Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .Tube case is available for the ac dc converter.It is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.Analog ICs of type ANALOG CIRCUIT are used in this AC DC converter.At this point, the switching frequency reaches 65kHz .This AC/DC converter is designed for use within the range of 8.5V~35V supply voltage (Vcc/Vdd).In total, there are 7 terminations.In this ac/dc converter, there are 7 pins.The ac-dc converter has 7 pins.It are possible to mount thare ac dc converters by Through Hole .The NCP1126 family can be used to search for similar acdc converters.In this AC to DC transformer, there are 1 outputs to run.The following ac to dc conversions are contained in Switching Regulator or Controllers .Its output voltage amounts to 12V .This output uses Fixed .
NCP1126AP65G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 65kHz
With 7 pins
Output Type : Fixed
NCP1126AP65G Applications
There are a lot of ON Semiconductor NCP1126AP65G AC DC Converters applications.
- MPS parts
- Power tools fast chargers with trickle and on/off
- Open Frame Switching Power Supply
- Replacements for bulky plug-in transformers
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Switching AC-DC Adapter
- Remotely-controlled appliances
- Tablets
- IoT Applications
- Lighting controls
