Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm), 7 Leads |
Number of Pins |
7 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2012 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
7 |
Terminal Finish |
Tin (Sn) |
HTS Code |
8542.39.00.01 |
Subcategory |
Switching Regulator or Controllers |
Power Rating |
26.5W |
Max Power Dissipation |
43W |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Terminal Pitch |
2.54mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Pin Count |
7 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
17V |
Analog IC - Other Type |
ANALOG CIRCUIT |
Voltage - Supply (Vcc/Vdd) |
8.8V~35V |
Topology |
Flyback |
Min Input Voltage |
15.8V |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
100kHz |
Max Input Voltage |
20V |
Internal Switch(s) |
Yes |
Fault Protection |
Over Load, Over Temperature, Over Voltage, Short Circuit |
Duty Cycle |
80% |
Output Isolation |
Isolated |
Voltage - Breakdown |
650V |
Height |
4.95mm |
Length |
10.16mm |
Width |
7.11mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
NCP1129BP100G Overview
An embedded ac to dc converter is included in 8-DIP (0.300, 7.62mm), 7 Leads package.In Tube case, the ac dc converter is available.As you can see, this AC/DC converter is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.In this AC DC converter, the analog IC type is ANALOG CIRCUIT .The switching frequency reaches 100kHz .This AC/DC converter is suitable for operation in the range of 8.8V~35V supply voltage (Vcc/Vdd).Total terminations are 7 .A ac/dc converter with 7 pins is available.Up to 7 pins are present on the ac-dc converter.The ac dc converters are suitable to mount by Through Hole .The ac to dc conversions are contained in Switching Regulator or Controllers .Input voltage for the AC to DC converter is available under 20V .It is possible to operate the AC to DC inverter with an input voltage that is less than 15.8V V.When the supply voltage is 17V , the interface IC may conduct.
NCP1129BP100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
Operating Supply Voltage at the range of 17V
NCP1129BP100G Applications
There are a lot of ON Semiconductor NCP1129BP100G AC DC Converters applications.
- AC--DC Adapter
- IoT Applications
- RCC SMPS
- Laptops
- Battery Chargers
- Set Top Boxes (STB)
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Small off-line low voltage power supplies
- Humidifier
- Battery chargers for media tablets