NCP1129BP65G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 15 hours ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 26.5W |
| Max Power Dissipation | 43W |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Pin Count | 7 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 17V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Voltage - Supply (Vcc/Vdd) | 8.5V~35V |
| Topology | Flyback |
| Min Input Voltage | 15.8V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Max Input Voltage | 20V |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 650V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1129BP65G Overview
An embedded ac to dc converter is included in 8-DIP (0.300, 7.62mm), 7 Leads package.The ac dc converter is available in Tube case.As you can see, this AC/DC converter is mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.The AC DC converter utilizes a type ANALOG CIRCUIT analog IC.There is 65kHz switching frequency.It can be used within the range of 8.5V~35V supply voltage (Vcc/Vdd).In total, there are 7 terminations.It contains 7 pins.There are a total of 7 pins on the ac-dc converter.It is suitable for mounting by Through Hole .The ac to dc conversions are included in Switching Regulator or Controllers .You may read the REACH SVHC standard at No SVHC .The AC to DC converter can be powered from the input voltage under 20V .If the input voltage is less than 15.8V V, the AC to DC inverter can be used.Interface ICs conduct when the supply voltage is 17V .Ideally, the input voltage (AC) applied to the AC to DC power converter should be less than 265V .
NCP1129BP65G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 65kHz
With 7 pins
Operating Supply Voltage at the range of 17V
NCP1129BP65G Applications
There are a lot of ON Semiconductor NCP1129BP65G AC DC Converters applications.
- Power adapters for network devices
- Battery chargers for smart phones
- Home Appliance Applications
- Off--line Battery Charger
- Z-Wave
- Utility meters
- AC?DC USB chargers for Cell Phones
- White goods
- Battery Chargers
- Air conditioners
