NCP1200AP100G
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1200 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 16V Max |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.25A |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Short Circuit |
| Duty Cycle | 83% |
| Output Isolation | Isolated |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1200AP100G Overview
In the 8-DIP (0.300, 7.62mm) package, the ac to dc converter is embedded.The AC/DC power converter type is Tube .A AC/DC converter of this type is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of 0°C~125°C TJ °C in order to achieve its full performance.This AC DC converter employs SWITCHING CONTROLLER analog IC type.The voltage range of the supply can be set to 16V Max (Vcc/Vdd).Total terminations are 8 .In this ac-dc converter, there are 8 pins.You can search similar acdc converters based on NCP1200 family.AC to DC converter is necessary to run 1 outputs.The ac to dc conversions can be found in Switching Regulator or Controllers .A high efficiency is achieved when operating at a frequency of 100kHz .An amount of current of 0.25A is the maximum that can be supplied to the ac to dc inverter.
NCP1200AP100G Features
Packaged with 8-DIP (0.300, 7.62mm)
NCP1200AP100G Applications
There are a lot of ON Semiconductor NCP1200AP100G AC DC Converters applications.
- Switching AC-DC Adapter
- AC?DC USB chargers for Tablets
- Standby Power for General Off-Line Applications
- AC?DC USB chargers for Cameras
- Automotive Infotainment
- Replacements for bulky plug-in transformers
- Set-top boxes
- Lighting controls
- LED lights
- AC--DC Adapter
