NCP1200AP60
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 60kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1200 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 16V Max |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.25A |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Short Circuit |
| Duty Cycle | 83% |
| Output Isolation | Isolated |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1200AP60 Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm) package.The AC/DC power converter type is Tube .The AC/DC converter is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of 0°C~125°C TJ degrees Celsius.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.Within the range of 16V Max supply voltage (Vcc/Vdd), it can be used.There are a total of 8 terminations in it.There are 8 pins in the ac-dc converter.If you select the NCP1200 family, you will be able to search similar acdc converters.There are 1 outputs to be processed.The ac to dc conversions can be found in Switching Regulator or Controllers .This power AC DC is capable of reaching high efficiency when operating at a frequency of 60kHz .Ac to dc inverters can only be powered at a maximum current of 0.25A .
NCP1200AP60 Features
Packaged with 8-DIP (0.300, 7.62mm)
NCP1200AP60 Applications
There are a lot of ON Semiconductor NCP1200AP60 AC DC Converters applications.
- Switching AC-DC Charger
- AC/DC Adaptors/Chargers for E-books
- Adaptors for Portable Media Player
- Low power ac?dc Adapters for Chargers
- Auxiliary Power Supplies
- Battery Chargers
- Appliances
- Power tools
- Chargers for cell/cordless phones
- PDAs
