NCP1200D100R2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Voltage - Rated DC | 16V |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1200 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 16V Max |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 67ns |
| Fall Time (Typ) | 28 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Short Circuit |
| Max Duty Cycle | 80 % |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1200D100R2 Overview
This ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width) .You can get it in AC/DC power converter Tape & Reel (TR) .In this case, the AC/DC converter is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -25°C~125°C TJ degrees Celsius.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.Vcc/Vdd can be used within the range of 16V Max supply voltage.In total, it has 8 terminations.In this ac/dc converter, there are 8 pins.The pins of the ac-dc converter count up to 8 .There are no problem mounting the ac dc converters by Surface Mount .You can search similar acdc converters based on NCP1200 family.There are 1 outputs to be run.The ac to dc conversions are contained in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 250mA .This power AC DC is capable of reaching high efficiency when operating at a frequency of 100kHz .
NCP1200D100R2 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 250mA
NCP1200D100R2 Applications
There are a lot of ON Semiconductor NCP1200D100R2 AC DC Converters applications.
- Set Top Boxes (STB)
- Battery chargers for smart phones
- Air conditioners
- AC?DC USB chargers for Cameras
- Adapters
- AC/DC Adaptors/Chargers for E-books
- ZigBee
- Standby Power Supplies
- Adapter/Charger for Cordless Phones
- Standby power supplies for IR
