NCP1200D40R2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Frequency | 40kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1200 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 16V Max |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 67ns |
| Fall Time (Typ) | 28 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Short Circuit |
| Max Duty Cycle | 80 % |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1200D40R2 Overview
This ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width) .You can get it in AC/DC power converter Tape & Reel (TR) .Surface Mount mounts this AC/DC converter.To deliver its performance, the ac dc converter should be operated at a temperature of -25°C~125°C TJ .Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.This AC/DC converter is designed for use within the range of 16V Max supply voltage (Vcc/Vdd).It has a total of 8 terminations.On this ac/dc converter, there are 8 pins.There are 8 pins in the ac-dc converter.Similar acdc converters can be found using the NCP1200 family.There are 1 outputs to be processed.The following ac to dc conversions are contained in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 250mA .AC to DC converter reaches high efficiency when operated at a frequency of 40kHz .When the supply voltage is 16V , the interface IC conducts.
NCP1200D40R2 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 250mA
Operating Supply Voltage at the range of 16V
NCP1200D40R2 Applications
There are a lot of ON Semiconductor NCP1200D40R2 AC DC Converters applications.
- Small off-line low voltage power supplies
- AC/DC Adaptors/Chargers for E-books
- Adapter/Charger for Cordless Phones
- Dimmers
- Battery chargers for cellular phones
- Standby Power Supplies
- Smartphones
- AC-DC Output Power Conversion Applications
- Switching AC-DC Charger
- Adapters
