NCP1200D60R2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Frequency | 60kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1200 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 16V Max |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 67ns |
| Fall Time (Typ) | 28 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Short Circuit |
| Max Duty Cycle | 80 % |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1200D60R2 Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the ac to dc converter is embedded.You can get it in AC/DC power converter Tape & Reel (TR) .There is a AC/DC converter mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -25°C~125°C TJ °C.This AC DC converter employs SWITCHING CONTROLLER analog IC type.Vcc/Vdd can be used within the range of 16V Max supply voltage.Total terminations are 8 .The ac/dc converter has a total of 8 pins.In this ac-dc converter, there are 8 pins.It is possible to search for similar acdc converters by using the NCP1200 family.There are 1 outputs to run.The following ac to dc conversions are contained in Switching Regulator or Controllers .250mA is set as the output current.This power AC DC is capable of reaching high efficiency when operating at a frequency of 60kHz .When the supply voltage is 16V , the interface IC conducts.
NCP1200D60R2 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 250mA
Operating Supply Voltage at the range of 16V
NCP1200D60R2 Applications
There are a lot of ON Semiconductor NCP1200D60R2 AC DC Converters applications.
- Adapter/Charger for Cell
- Auxiliary Power Supply
- Set Top Boxes (STB)
- Low power ac?dc Adapters for Chargers
- USB type-c v1.2 chargers with optional VDM
- Off--line Battery Charger
- Tablets
- Consumer electronics
- Universal Off-Line Power Supplies
- Z-Wave
