Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE, NOT REC (Last Updated: 6 days ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Operating Temperature |
-25°C~125°C TJ |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin (Sn) |
Subcategory |
Switching Regulator or Controllers |
Max Power Dissipation |
550mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Frequency |
100kHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
NCP1200 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Type |
Voltage |
Input Voltage-Nom |
11V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Output Current |
250mA |
Voltage - Supply (Vcc/Vdd) |
16V Max |
Max Supply Current |
4.9mA |
Topology |
Flyback |
Control Mode |
CURRENT-MODE |
Halogen Free |
Halogen Free |
Control Technique |
PULSE WIDTH MODULATION |
Rise Time |
67ns |
Fall Time (Typ) |
28 ns |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
No |
Fault Protection |
Current Limiting, Over Load, Short Circuit |
Max Duty Cycle |
80 % |
Input Bias Current |
20nA |
Output Isolation |
Isolated |
Height |
3.44mm |
Length |
10.16mm |
Width |
6.6mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
NCP1200P100G Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm) contains the ac to dc converter.The AC/DC power converter Tube is available for this product.It is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -25°C~125°C TJ °C in order to achieve its full performance.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .The voltage range of the supply can be set to 16V Max (Vcc/Vdd).There have been 8 terminations of this program.There are 8 pins on the ac/dc converter.There are 8 pins on the ac-dc converter.Through Hole are the recommended mounting method for the ac dc converters.If you select the NCP1200 family, you will be able to search similar acdc converters.There are 1 outputs to be run.The following ac to dc conversions are contained in Switching Regulator or Controllers .Current output is set to 250mA .This power AC DC is capable of reaching high efficiencies when operating at a frequency of 100kHz .You are able to read the REACH SVHC standard at: No SVHC .AC to DC converter is capable of handling a maximum supply current of 4.9mA A.It uses Voltage as an output.
NCP1200P100G Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
Output Current at 250mA
Output Type : Voltage
NCP1200P100G Applications
There are a lot of ON Semiconductor NCP1200P100G AC DC Converters applications.
- Switching AC-DC Adapter
- AC--DC Adapter
- MP3
- Power Adaptors
- Handheld/Battery-Powered Systems
- Laptops
- Utility meters
- Standby Power Supply
- Set Top Boxes (STB)
- PDAs