NCP1200P60
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 60kHz |
| Base Part Number | NCP1200 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 16V Max |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 67ns |
| Fall Time (Typ) | 28 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Short Circuit |
| Max Duty Cycle | 80 % |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Height Seated (Max) | 4.45mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1200P60 Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm) .In Tube AC/DC power converter, it is available.There is a mounting point for this AC/DC converter in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -25°C~125°C TJ °C in order for it to perform properly.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.As long as the supply voltage (Vcc/Vdd) is within the range of 16V Max , the AC/DC converter may be used.As a result, it has a total of 8 terminations.On the ac/dc converter, there are 8 pins.There are 8 pins in total.The NCP1200 family can be used to search for similar acdc converters.There are 1 outputs to be run.AC to DC converter is included in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 250mA .A high efficiency can be achieved by operating at a frequency of 60kHz .As soon as the supply voltage drops to 16V , the interface IC conducts.
NCP1200P60 Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
Output Current at 250mA
Operating Supply Voltage at the range of 16V
NCP1200P60 Applications
There are a lot of ON Semiconductor NCP1200P60 AC DC Converters applications.
- LED lights
- Switching AC-DC Charger
- WiFi Wireless
- Records
- USB-PD 2.0
- Set Top Boxes (STB)
- Adaptors for Portable Media Player
- DVD players
- Networking
- Open Frame Switching Power Supply
