NCP1200P60G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 550mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 60kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1200 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 16V Max |
| Max Supply Current | 4.9mA |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 67ns |
| Fall Time (Typ) | 28 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Short Circuit |
| Max Duty Cycle | 80 % |
| Input Bias Current | 20nA |
| Output Isolation | Isolated |
| Height | 4.953mm |
| Length | 10.16mm |
| Width | 7.112mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1200P60G Overview
It is embedded in package 8-DIP (0.300, 7.62mm) .The ac dc converter is available in Tube case.Through Hole is mounted in the way of this AC/DC converter.For the ac dc converter to perform at its best, it should be operated at a temperature of -25°C~125°C TJ °C.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.This AC/DC converter is designed for use within the range of 16V Max supply voltage (Vcc/Vdd).As a result, it has a total of 8 terminations.The ac/dc converter has 8 pins.There are a total of 8 pins on the ac-dc converter.Through Hole is the recommended mounting method for the ac dc converters.A similar acdc converter can be searched by using the NCP1200 family.There are 1 outputs to be run.There are a ac to dc conversions included in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 250mA .High efficiency can be achieved when AC to DC converters frequency is set to 60kHz .It is possible to read the REACH SVHC standard at: No SVHC .The maximum supply current is 4.9mA .
NCP1200P60G Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
Output Current at 250mA
NCP1200P60G Applications
There are a lot of ON Semiconductor NCP1200P60G AC DC Converters applications.
- Z-Wave
- Automotive Infotainment
- AC/DC Adaptors/Chargers for E-books
- USB type-c v1.2 chargers with optional VDM
- Standby and Auxiliary Power Supplies
- Digital cameras
- Standby Power Supply
- Low power ac?dc Adapters for Chargers
- Wireless System
- Low-Voltage I/O System Power
