NCP1201D100R2
| Parameters | |
|---|---|
| Voltage - Supply (Vcc/Vdd) | 16V Max |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 116ns |
| Fall Time (Typ) | 41 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Max Duty Cycle | 83 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 500V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1201 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Output Voltage | 6.5V |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
NCP1201D100R2 Overview
This ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width) .The AC/DC power converter Tape & Reel (TR) is available for this product.This AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.At this point, the switching frequency reaches 100kHz .Within the range of 16V Max supply voltage (Vcc/Vdd), it can be used.A total of 8 terminations have been recorded.The ac-dc converter has 8 pins.Based on the NCP1201 family, you can search for similar acdc converters.There are 1 outputs to run.The ac to dc conversions can be found in Switching Regulator or Controllers .Current output is set to 250mA .Its output voltage amounts to 6.5V .It is possible for the interface IC to conduct when the supply voltage is 16V .
NCP1201D100R2 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at 100kHz
Output Current at 250mA
Operating Supply Voltage at the range of 16V
NCP1201D100R2 Applications
There are a lot of ON Semiconductor NCP1201D100R2 AC DC Converters applications.
- AC/DC LED Driver applications
- Networking
- AC/DC Adaptors/Chargers for Cell Phones
- SMPS house keeping power supplies
- AC-DC Output Power Conversion Applications
- Standby Power Supply
- Standby power supplies for TV
- AC?DC USB chargers for Cameras
- Auxiliary Power Supplies
- Charger
