NCP1201P100
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | NCP1201 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6.5V |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 16V Max |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 116ns |
| Fall Time (Typ) | 41 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Max Duty Cycle | 83 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 500V |
| Height Seated (Max) | 4.45mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1201P100 Overview
In the 8-DIP (0.300, 7.62mm) package, the ac to dc converter is embedded.There is a AC/DC power converter of Tube available.The AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.As a result, the switching frequency reaches 100kHz .It can be used within the range of 16V Max supply voltage (Vcc/Vdd).There are a total of 8 terminations in it.It contains 8 pins.The pins of the ac-dc converter total to 8 .The NCP1201 family allows you to search for similar acdc converters.A total of 1 outputs are available for processing.Switching Regulator or Controllers contains the ac to dc conversions.There is 250mA output current set.It produces a voltage of 6.5V .An interface IC conducts when its supply voltage is 16V .
NCP1201P100 Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 100kHz
With 8 pins
Output Current at 250mA
Operating Supply Voltage at the range of 16V
NCP1201P100 Applications
There are a lot of ON Semiconductor NCP1201P100 AC DC Converters applications.
- Cleaners
- Smartphones
- AC--DC Adapter
- Records
- Adapter/Charger for Cordless Phones
- Power Adaptors
- Switching AC-DC Adapter
- Appliance Power Supplies
- Adaptors for DSCs
- Off--line Battery Charger
