NCP1203D60R2G
| Parameters | |
|---|---|
| Frequency | 60kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1203 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | Voltage |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 7.8V~16V |
| Max Supply Current | 5mA |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Breakdown Voltage | 500V |
| Rise Time | 67ns |
| Fall Time (Typ) | 28 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Max Duty Cycle | 80 % |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.8V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 142.994995mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | SMARTMOS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
NCP1203D60R2G Overview
This ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width) .Tape & Reel (TR) case is available for the ac dc converter.There is a AC/DC converter mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TJ °C in order to achieve its full performance.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.As long as the supply voltage (Vcc/Vdd) is within the range of 7.8V~16V , the AC/DC converter may be used.It has a total of 8 terminations.In this ac/dc converter, there are 8 pins.In this ac-dc converter, there are 8 pins.It are possible to mount thare ac dc converters by Surface Mount .The AC to DC converter belongs to the manufacturer family of SMARTMOS? .If you select the NCP1203 family, you will be able to search for similar acdc converters.The number of outputs to run is 1 .AC to DC converter is included in Switching Regulator or Controllers .Currently, the output current is set to 250mA .AC to DC converter reaches high efficiency when operated at a frequency of 60kHz .It is possible to read the REACH SVHC standard at: No SVHC .Supply currents up to 5mA can be handled by this power AC DC.The output it is configured with uses Voltage .
NCP1203D60R2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 250mA
Output Type : Voltage
NCP1203D60R2G Applications
There are a lot of ON Semiconductor NCP1203D60R2G AC DC Converters applications.
- Auxiliary Power Supplies
- Remotely-controlled appliances
- Appliances
- Automotive Infotainment
- Linear Adapter Replacements
- Shaver Charger
- Lighting controls
- Industrial controls
- Small off-line low voltage power supplies
- Standby Power Supplies
