NCP1203P100
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| Series | SMARTMOS™ |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | NCP1203 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 7.8V~16V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Breakdown Voltage | 500V |
| Rise Time | 67ns |
| Fall Time (Typ) | 28 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Max Duty Cycle | 80 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.8V |
| Height Seated (Max) | 4.45mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1203P100 Overview
In the package 8-DIP (0.300, 7.62mm) , the ac to dc converter is embedded.The AC/DC power converter is available in Tube .There is a mounting point for this AC/DC converter in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~125°C TJ °C.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.At this point, the switching frequency reaches 100kHz .Within the range of 7.8V~16V supply voltage (Vcc/Vdd), it can be used.As a result, it has had 8 terminations.The ac/dc converter has a total of 8 pins.There are 8 pins in total.This AC to DC converter belongs to the SMARTMOS? family of manufacturers.Search similar acdc converters based on NCP1203 family members.The number of outputs to run is 1 .The ac to dc conversions are included in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 250mA .At 16V supply voltage, the interface IC conducts.
NCP1203P100 Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 100kHz
With 8 pins
Output Current at 250mA
Operating Supply Voltage at the range of 16V
NCP1203P100 Applications
There are a lot of ON Semiconductor NCP1203P100 AC DC Converters applications.
- Charger
- Standby power supplies for VCR
- WiFi Wireless
- Battery chargers for mobile devices with touchpad display
- Adapters
- Home appliances
- Lighting controls
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Switching AC-DC Charger
- IoT Applications
