NCP1203P40
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | SMARTMOS™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | COMMERCIAL |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 7.8V~16V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.25A |
| Frequency - Switching | 40kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.8V |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
NCP1203P40 Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm) contains the ac to dc converter.In Tube case, the ac dc converter is available.There is a mounting point for this AC/DC converter in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TJ in order to ensure its performance.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.In this AC to DC transformer, the switching frequency is 40kHz .This AC/DC converter is designed for use within the range of 7.8V~16V supply voltage (Vcc/Vdd).As a result, it has had 8 terminations.The pins of the ac-dc converter total to 8 .The AC to DC converter belongs to the manufacturer family of SMARTMOS? .Ac to dc inverters can be powered by up to 0.25A current.
NCP1203P40 Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 40kHz
NCP1203P40 Applications
There are a lot of Rochester Electronics, LLC NCP1203P40 AC DC Converters applications.
- Networking
- Power adapters for network devices
- Battery chargers for cellular phones
- ATX/BTX Auxiliary Power
- AC?DC USB chargers for Tablets
- Small off-line low voltage power supplies
- Dimmers
- USB-PD 2.0
- AC/DC Adaptors/Chargers for Cell Phones
- LED lights
