NCP1203P60G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2004 |
| Series | SMARTMOS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 60kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1203 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 7.8V~16V |
| Max Supply Current | 5mA |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Breakdown Voltage | 500V |
| Rise Time | 67ns |
| Fall Time (Typ) | 28 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Max Duty Cycle | 80 % |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.8V |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1203P60G Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm) contains the ac to dc converter.You can get it in AC/DC power converter Tube .There is a AC/DC converter mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TJ in order to ensure its performance.The AC DC converter uses a type SWITCHING CONTROLLER analog integrated circuit.As long as the supply voltage (Vcc/Vdd) is within the range of 7.8V~16V , the AC/DC converter may be used.In total, there are 8 terminations.The ac/dc converter has 8 pins.In this ac-dc converter, there are 8 pins.It is suitable for mounting by Through Hole .The product is acdc converter of the SMARTMOS? manufacturer family.If you select the NCP1203 family, you will be able to search for similar acdc converters.There are 1 outputs to run.The ac to dc conversions are included in Switching Regulator or Controllers .The output current is set to 250mA .A high efficiency is achieved when operating at a frequency of 60kHz .SVHC for REACH can be found in the standard No SVHC .Supply currents up to 5mA can be handled by this power AC DC.
NCP1203P60G Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
Output Current at 250mA
NCP1203P60G Applications
There are a lot of ON Semiconductor NCP1203P60G AC DC Converters applications.
- Standby Power Supplies
- Standby Power for General Off-Line Applications
- Small off-line low voltage power supplies
- White goods
- Industrial controls
- IoT Applications
- PDAs
- Automotive Telematics
- Air Conditioning
- Remotely-controlled appliances
