NCP1205P
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 125kHz |
| Base Part Number | NCP1205 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 8V~30V |
| Input Voltage (Min) | 8V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 90kHz~125kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Voltage, Short Circuit |
| Output Isolation | Isolated |
| Height Seated (Max) | 4.45mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1205P Overview
It is embedded in package 8-DIP (0.300, 7.62mm) .In Tube case, the ac dc converter is available.The AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -25°C~125°C TJ °C in order to achieve its full performance.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.In this AC to DC transformer, the switching frequency is 90kHz~125kHz .The voltage range of the supply can be set to 8V~30V (Vcc/Vdd).There are a total of 8 terminations.There are 8 pins on the ac/dc converter.There are a total of 8 pins on the ac-dc converter.The NCP1205 family allows you to search for similar acdc converters.AC to DC converter is necessary to run 1 outputs.The ac to dc conversions are included in Switching Regulator or Controllers .We are setting the output current to 250mA .Its output voltage is12V .High efficiency can be achieved when AC to DC converters frequency is set to 125kHz .Interface ICs conduct when the supply voltage is 30V .
NCP1205P Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 90kHz~125kHz
With 8 pins
Output Current at 250mA
Operating Supply Voltage at the range of 30V
NCP1205P Applications
There are a lot of ON Semiconductor NCP1205P AC DC Converters applications.
- Air Conditioning
- AC/DC Adaptors/Chargers for PDAs
- Consumer electronics
- Tablets
- AC?DC USB chargers for Tablets
- USB-PD 2.0
- Auxiliary Power Supply
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- MPS parts
- DVD players
