NCP1205P2
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 125kHz |
| Base Part Number | NCP1205 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 8V~30V |
| Input Voltage (Min) | 8V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 90kHz~125kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Voltage, Short Circuit |
| Output Isolation | Isolated |
| Height Seated (Max) | 4.69mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1205P2 Overview
It is embedded in package 14-DIP (0.300, 7.62mm) .The ac dc converter is available in Tube case.It is mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -25°C~125°C TJ °C.This AC DC converter employs SWITCHING CONTROLLER analog IC type.Switching frequency reaches 90kHz~125kHz Hz.It can be used within the range of 8V~30V supply voltage (Vcc/Vdd).There have been 14 terminations of this program.Approximately 14 pins are present on the ac/dc converter.There are a total of 14 pins on the ac-dc converter.It is possible to search for similar acdc converters by using the NCP1205 family.A total of 1 outputs are available for processing.The ac to dc conversions can be found in Switching Regulator or Controllers .The output current is set to 250mA .Its output voltage is12V .High efficiency can be achieved when AC to DC converters frequency is set to 125kHz .Interface ICs conduct when the supply voltage is 30V .
NCP1205P2 Features
Packaged with 14-DIP (0.300, 7.62mm)
Switching Frequency at 90kHz~125kHz
With 14 pins
Output Current at 250mA
Operating Supply Voltage at the range of 30V
NCP1205P2 Applications
There are a lot of ON Semiconductor NCP1205P2 AC DC Converters applications.
- Laptops and personal digital assistants
- USB type-c v1.2 chargers with optional VDM
- AC?DC USB chargers for Tablets
- Switching AC-DC Charger
- Battery chargers for media tablets
- Automotive Infotainment
- Laptops
- Linear Adapter Replacements
- LED Driver
- LED lights
