banner_page

NCP1207AP

8 Terminations10.6V~20V 8 Pin NCP1207 AC to DC power converter1 OutputsUp to 200kHz


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NCP1207AP
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 305
  • Description: 8 Terminations10.6V~20V 8 Pin NCP1207 AC to DC power converter1 OutputsUp to 200kHz (Kg)

Details

Tags

Parameters
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Additional Feature RESONANT CONTROL TECHNIQUE IS ALSO AVAILABLE
Subcategory Switching Regulator or Controllers
Technology CMOS
Terminal Position DUAL
Number of Functions 1
Terminal Pitch 2.54mm
Base Part Number NCP1207
Pin Count 8
Number of Outputs 1
Operating Supply Voltage 18V
Input Voltage-Nom 11V
Analog IC - Other Type SWITCHING CONTROLLER
Output Current 500mA
Voltage - Supply (Vcc/Vdd) 10.6V~20V
Topology Flyback
Control Mode CURRENT-MODE
Frequency - Switching Up to 200kHz
Control Technique PULSE WIDTH MODULATION
Rise Time 40ns
Fall Time (Typ) 20 ns
Switcher Configuration SINGLE
Internal Switch(s) No
Fault Protection Current Limiting, Over Load, Over Temperature, Over Voltage
Output Isolation Isolated
Height Seated (Max) 4.45mm
Width 7.62mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 8
Operating Temperature -40°C~125°C TJ
Packaging Tube
Published 2007
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)

NCP1207AP Overview


In the 8-DIP (0.300, 7.62mm) package, the ac to dc converter is embedded.The AC/DC power converter Tube is available for this product.As you can see, this AC/DC converter is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~125°C TJ °C in order for it to perform properly.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.When the switching frequency reaches Up to 200kHz , the circuit is closed.Within the range of 10.6V~20V supply voltage (Vcc/Vdd), it can be used.There are a total of 8 terminations.Approximately 8 pins are present on the ac/dc converter.There are a total of 8 pins on the ac-dc converter.Based on the NCP1207 family, you can search for similar acdc converters.In this AC to DC transformer, there are 1 outputs to run.The ac to dc conversions are included in Switching Regulator or Controllers .We have set the output current to 500mA .In addition to RESONANT CONTROL TECHNIQUE IS ALSO AVAILABLE , this ACDC converter can also be used to determine RESONANT CONTROL TECHNIQUE IS ALSO AVAILABLE .It is possible for the interface IC to conduct when the supply voltage is 18V .

NCP1207AP Features


Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at Up to 200kHz
With 8 pins
Output Current at 500mA
Operating Supply Voltage at the range of 18V

NCP1207AP Applications


There are a lot of ON Semiconductor NCP1207AP AC DC Converters applications.

  • Cleaners
  • Z-Wave
  • Standby Power Supply
  • Standby and Auxiliary Power Supplies
  • Open Frame Switching Power Supply
  • WiFi Wireless
  • AC?DC USB chargers for Tablets
  • Industrial controls
  • USB-PD 2.0
  • AC/DC Adaptors/Chargers for PDAs

Write a review

Note: HTML is not translated!
    Bad           Good