NCP1207BDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | ALSO HAS RESONANT CONTROL TECHNIQUE |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 200kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1207 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Voltage | 10V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 10.6V~20V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 200kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 28.6 % |
| Output Isolation | Isolated |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1207BDR2G Overview
This ac to dc converter is included in the package 8-SOIC (0.154, 3.90mm Width), 7 Leads .The AC/DC power converter type is Tape & Reel (TR) .The AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~125°C TJ °C.The AC DC converter uses a type SWITCHING CONTROLLER analog integrated circuit.The switching frequency reaches Up to 200kHz .As long as the supply voltage (Vcc/Vdd) is within the range of 10.6V~20V , the AC/DC converter may be used.As a result, it has a total of 7 terminations.On this ac/dc converter, there are 7 pins.In this ac-dc converter, there are 7 pins.Surface Mount is a suitable mounting point for the ac dc converters.Search similar acdc converters based on NCP1207 family members.A total of 1 outputs need to be run.The ac to dc conversions are included in Switching Regulator or Controllers .500mA is set as the output current.There is 10V output voltage from this AC/DC converter.High efficiency can be achieved when AC to DC converters frequency is set to 200kHz .You may read the REACH SVHC standard at No SVHC .Also, ALSO HAS RESONANT CONTROL TECHNIQUE can be found using this ACDC converter.
NCP1207BDR2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at Up to 200kHz
With 7 pins
Output Current at 500mA
NCP1207BDR2G Applications
There are a lot of ON Semiconductor NCP1207BDR2G AC DC Converters applications.
- Adaptors for Portable Media Player
- Replaces linear transformers
- MPS parts
- Networking
- AC?DC USB chargers for Cell Phones
- Home appliances
- Standby Power Supply
- Low power ac?dc Adapters for Chargers
- Standby Power Supplies
- Automotive Clusters
