NCP1207P
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1207 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 10.6V~16V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.5A |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Output Isolation | Isolated |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1207P Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm) package.It is available in Tube AC/DC power converter.Through Hole is mounted in the way of this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TJ in order to ensure its performance.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.This AC/DC converter is suitable for operation in the range of 10.6V~16V supply voltage (Vcc/Vdd).As a result, it has had 8 terminations.The pins of the ac-dc converter count up to 8 .You can search similar acdc converters based on NCP1207 family.There are 1 outputs to be processed.The ac to dc conversions are contained in Switching Regulator or Controllers .As long as AC to DC converter is operated at frequency 100kHz ,it is capable of attaining high efficiency.Ac to dc inverters can be supplied with a maximum current of 0.5A .
NCP1207P Features
Packaged with 8-DIP (0.300, 7.62mm)
NCP1207P Applications
There are a lot of ON Semiconductor NCP1207P AC DC Converters applications.
- Standby Power Supplies
- 3.3V power supplies
- Lighting controls
- Low-Voltage I/O System Power
- Switching AC-DC Charger
- LED Driver
- Humidifier
- AC/DC LED Driver applications
- Cellular phone chargers
- Battery chargers for mobile devices with touchpad display
