NCP1212PG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | MATTE TIN |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Input Voltage-Nom | 16V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 10V~28V |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 10V |
| Topology | Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | Up to 200kHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Over Voltage |
| Duty Cycle | 48%, 82% |
| Output Isolation | Isolated |
| Voltage - Start Up | 15V |
| Height Seated (Max) | 5.33mm |
| Length | 9.27mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
NCP1212PG Overview
This ac to dc converter is included in the package 8-DIP (0.300, 7.62mm) .The AC/DC power converter is available in Tube .As you can see, this AC/DC converter is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.At this point, the switching frequency reaches Up to 200kHz .Vcc/Vdd can be used within the range of 10V~28V supply voltage.As a result, it has had 8 terminations.There are a total of 8 pins on the ac-dc converter.On the basis of a unique technique, it is possible to ensure an input voltage with the maximum value of 25V .The maximum current that can be supplied to the ac to dc inverter is 1A .
NCP1212PG Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at Up to 200kHz
NCP1212PG Applications
There are a lot of Rochester Electronics, LLC NCP1212PG AC DC Converters applications.
- Auxiliary Power Supply
- 3.3V power supplies
- Power adapters for monitors
- Battery chargers for media tablets
- Power tools
- Automotive Clusters
- Small off-line low voltage power supplies
- Humidifier
- Wall switches
- Battery chargers for mobile devices with touchpad display
