NCP1216AP65
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 7 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | NCP1216 |
| Pin Count | 8 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 10V~16V |
| Input Voltage (Min) | 11V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.5A |
| Frequency - Switching | 65kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Max Duty Cycle | 50 % |
| Duty Cycle | 46.5% |
| Output Isolation | Isolated |
| Height Seated (Max) | 4.45mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1216AP65 Overview
8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.There is a AC/DC power converter of Tube available.The AC/DC converter is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of 0°C~150°C TJ °C so that it can deliver its performance.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.Switching frequency reaches 65kHz Hz.As long as the supply voltage (Vcc/Vdd) is within the range of 10V~16V , the AC/DC converter may be used.In total, it has 7 terminations.It contains 7 pins.There are a total of 8 pins on the ac-dc converter.If you select the NCP1216 family, you will be able to search for similar acdc converters.The ac to dc conversions can be found in Switching Regulator or Controllers .Ac to dc inverters can only be powered at a maximum current of 0.5A .
NCP1216AP65 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 65kHz
With 7 pins
NCP1216AP65 Applications
There are a lot of ON Semiconductor NCP1216AP65 AC DC Converters applications.
- Universal Off-Line Power Supplies
- Z-Wave
- Battery chargers for cordless
- Adapters
- Standby Power for General Off-Line Applications
- Adapters for Handheld Electronics
- AC/DC Adaptors/Chargers for Cell Phones
- Industrial controls
- Home appliances
- Auxiliary Power Supplies
