NCP1216D65R2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 142.994995mg |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Frequency | 65kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1216 |
| Pin Count | 8 |
| Output Voltage | 10V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 10V~16V |
| Max Supply Current | 5mA |
| Input Voltage (Min) | 11V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Max Duty Cycle | 81 % |
| Duty Cycle | 75% |
| Output Isolation | Isolated |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1216D65R2G Overview
An embedded ac to dc converter is included in 8-SOIC (0.154, 3.90mm Width) package.The ac dc converter is available in Tape & Reel (TR) case.This AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of 0°C~150°C TJ in order to ensure its performance.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.It can be used within the range of 10V~16V supply voltage (Vcc/Vdd).There are a total of 8 terminations.On the ac/dc converter, there are 8 pins.The pins of the ac-dc converter total to 8 .Surface Mount is a suitable mounting point for the ac dc converters.Based on the NCP1216 family, you can search for similar acdc converters.The ac to dc conversions are contained in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 500mA .There is 10V output voltage from this AC/DC converter.A high efficiency is achieved when operating at a frequency of 65kHz .This is the standard of REACH SVHC : No SVHC .Approximately 5mA amps of supply current can be handled by the power AC DC.
NCP1216D65R2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 500mA
NCP1216D65R2G Applications
There are a lot of ON Semiconductor NCP1216D65R2G AC DC Converters applications.
- 3.3V power supplies
- AC/DC Adaptors/Chargers for Cell Phones
- PDAs
- IoT Applications
- SMPS house keeping power supplies
- Humidifier
- Laptops and personal digital assistants
- Linear Adapter Replacements
- Air conditioners
- Home appliances
