Parameters |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm), 7 Leads |
Surface Mount |
NO |
Operating Temperature |
0°C~150°C TJ |
Packaging |
Tube |
Published |
2007 |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Switching Regulator or Controllers |
Technology |
CMOS |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Frequency |
100kHz |
Base Part Number |
NCP1216 |
Pin Count |
8 |
JESD-30 Code |
R-PDIP-T7 |
Number of Outputs |
1 |
Operating Supply Voltage |
16V |
Input Voltage-Nom |
11V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Voltage - Supply (Vcc/Vdd) |
10V~16V |
Topology |
Flyback |
Control Mode |
CURRENT-MODE |
Output Current-Max |
0.5A |
Control Technique |
PULSE WIDTH MODULATION |
Rise Time |
60ns |
Fall Time (Typ) |
20 ns |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
No |
Fault Protection |
Over Load, Over Temperature, Short Circuit |
Max Duty Cycle |
81 % |
Duty Cycle |
75% |
Output Isolation |
Isolated |
Height Seated (Max) |
4.45mm |
Length |
9.78mm |
Width |
7.62mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
NCP1216P100 Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .It is available in Tube AC/DC power converter.As you can see, this AC/DC converter is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of 0°C~150°C TJ °C so that it can deliver its performance.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.This AC/DC converter is suitable for operation in the range of 10V~16V supply voltage (Vcc/Vdd).There are a total of 7 terminations.In this ac-dc converter, there are 8 pins.Search similar acdc converters based on NCP1216 family members.A total of 1 outputs are to be processed.The ac to dc conversions are contained in Switching Regulator or Controllers .This power AC DC is capable of reaching high efficiency when operating at a frequency of 100kHz .An amount of current of 0.5A is the maximum that can be supplied to the ac to dc inverter.Interfacing ICs conduct when there is 16V supply voltage.
NCP1216P100 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Operating Supply Voltage at the range of 16V
NCP1216P100 Applications
There are a lot of ON Semiconductor NCP1216P100 AC DC Converters applications.
- 3.3V power supplies
- MPS parts
- Power adapters for monitors
- Standby power
- Linear Adapter Replacements
- Utility meters
- Low-Voltage I/O System Power
- Set Top Boxes (STB)
- Set-top boxes
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)