NCP1216P133
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 7 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 133kHz |
| Base Part Number | NCP1216 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 10V~16V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.5A |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Max Duty Cycle | 81 % |
| Duty Cycle | 75% |
| Output Isolation | Isolated |
| Height Seated (Max) | 4.45mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1216P133 Overview
An embedded ac to dc converter is included in 8-DIP (0.300, 7.62mm), 7 Leads package.In Tube case, the ac dc converter is available.It is mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of 0°C~150°C TJ °C to deliver its optimal performance.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .A range of 10V~16V supply voltages (Vcc/Vdd) can be used.Total terminations are 7 .Approximately 7 pins are present on the ac/dc converter.The ac-dc converter has 8 pins.The NCP1216 family can be used to search for similar acdc converters.A total of 1 outputs need to be run.The following ac to dc conversions are contained in Switching Regulator or Controllers .As long as AC to DC converter is operated at frequency 133kHz ,it is capable of attaining high efficiency.A maximum current of 0.5A may be supplied to the ac to dc inverter.An interface IC conducts when its supply voltage is 16V .
NCP1216P133 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Operating Supply Voltage at the range of 16V
NCP1216P133 Applications
There are a lot of ON Semiconductor NCP1216P133 AC DC Converters applications.
- Industrial controls
- Smartphones
- Tablets
- Laptops
- Vacuum Cleaner
- Air conditioners
- Universal input AC/DC adapters (15W - 45W)
- Set-top boxes
- Battery chargers for smart phones
- Cleaners
