NCP1216P133G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 133kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1216 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Max Output Current | 500mA |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 10V~16V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Max Duty Cycle | 81 % |
| Duty Cycle | 75% |
| Output Isolation | Isolated |
| Height Seated (Max) | 4.45mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1216P133G Overview
It is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .It is available in Tube AC/DC power converter.Through Hole mounts this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of 0°C~150°C TJ degrees Celsius.The AC DC converter uses a type SWITCHING CONTROLLER analog integrated circuit.The voltage range of the supply can be set to 10V~16V (Vcc/Vdd).There are a total of 7 terminations.A ac/dc converter with 7 pins is available.The pins of the ac-dc converter count up to 7 .Through Hole are the recommended mounting method for the ac dc converters.Similar acdc converters can be found using the NCP1216 family.There are 1 outputs to be run.The ac to dc conversions are included in Switching Regulator or Controllers .We have set the output current to 500mA .A high efficiency is achieved when operating at a frequency of 133kHz .REACH SVHC standard can be found at No SVHC .
NCP1216P133G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Output Current at 500mA
NCP1216P133G Applications
There are a lot of ON Semiconductor NCP1216P133G AC DC Converters applications.
- Humidifier
- Networking
- White goods
- Battery chargers for cordless
- Replacements for bulky plug-in transformers
- Standby Power for General Off-Line Applications
- ATX/BTX Auxiliary Power
- Standby power
- Power tools
- Battery chargers for media tablets
