NCP1216P65
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 65kHz |
| Base Part Number | NCP1216 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 10V~16V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.5A |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Max Duty Cycle | 81 % |
| Duty Cycle | 75% |
| Output Isolation | Isolated |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1216P65 Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.In Tube case, the ac dc converter is available.Through Hole mounts this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of 0°C~150°C TJ degrees Celsius.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.This AC/DC converter is designed for use within the range of 10V~16V supply voltage (Vcc/Vdd).In total, there are 7 terminations.There are 8 pins in the ac-dc converter.You can search similar acdc converters based on NCP1216 family.A total of 1 outputs need to be run.The ac to dc conversions are included in Switching Regulator or Controllers .AC to DC converter reaches high efficiency when operated at a frequency of 65kHz .The maximum current that can be supplied to the ac to dc inverter is 0.5A .An interface IC conducts when its supply voltage is 16V .
NCP1216P65 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Operating Supply Voltage at the range of 16V
NCP1216P65 Applications
There are a lot of ON Semiconductor NCP1216P65 AC DC Converters applications.
- Dimmers
- Power adapters for monitors
- White goods
- MP3
- Set-top boxes
- Appliance Power Supplies
- AC-DC Output Power Conversion Applications
- Switching AC-DC Charger
- Switching AC-DC Adapter
- Standby power supplies for VCR
