NCP1217AD100R2
| Parameters | |
|---|---|
| Duty Cycle | 46.5% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.8V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1217 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~16V |
| Input Voltage (Min) | 8.3V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Max Duty Cycle | 46.5 % |
NCP1217AD100R2 Overview
An embedded ac to dc converter is included in 8-SOIC (0.154, 3.90mm Width) package.There is a AC/DC power converter of Tape & Reel (TR) available.As you can see, this AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of 0°C~150°C TJ in order to ensure its performance.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.This AC/DC converter is suitable for operation in the range of 7.6V~16V supply voltage (Vcc/Vdd).In total, there are 8 terminations.The ac-dc converter has 8 pins.If you select the NCP1217 family, you will be able to search similar acdc converters.AC to DC converter is necessary to run 1 outputs.There are a ac to dc conversions included in Switching Regulator or Controllers .There is 500mA output current set.A high efficiency is achieved when operating at a frequency of 100kHz .
NCP1217AD100R2 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Output Current at 500mA
NCP1217AD100R2 Applications
There are a lot of ON Semiconductor NCP1217AD100R2 AC DC Converters applications.
- Low-Voltage I/O System Power
- AC-DC Output Power Conversion Applications
- White goods
- Air Conditioning
- Consumer electronics
- Battery chargers for media tablets
- Standby Power Supply
- AC?DC USB chargers for Cell Phones
- Vacuum Cleaner
- Power Adaptors
