NCP1217AD100R2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1217 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 2.1mA |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~16V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Max Duty Cycle | 50 % |
| Duty Cycle | 46.5% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.8V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1217AD100R2G Overview
The ac to dc converter is embedded in 8-SOIC (0.154, 3.90mm Width) package.There is a AC/DC power converter of Tape & Reel (TR) available.In this case, the AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of 0°C~150°C TJ °C.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.When the switching frequency reaches 100kHz , the circuit is closed.A range of 7.6V~16V supply voltages (Vcc/Vdd) can be used.Total terminations are 8 .Approximately 8 pins are present on the ac/dc converter.The ac-dc converter has 8 pins.The ac dc converters are suitable for mounting by Surface Mount .Similar acdc converters can be found using the NCP1217 family.A total of 1 outputs need to be run.Switching Regulator or Controllers includes the ac to dc conversions.It has been set to 500mA for the output current.Its output voltage amounts to 12V .
NCP1217AD100R2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at 100kHz
With 8 pins
Output Current at 500mA
NCP1217AD100R2G Applications
There are a lot of ON Semiconductor NCP1217AD100R2G AC DC Converters applications.
- 3.3V power supplies
- Battery chargers for smart phones
- Auxiliary Power Supplies
- Rice Cooker
- Power Adaptors
- Replacements for bulky plug-in transformers
- Charger
- Power Adaptors
- Low power ac?dc Adapters for Chargers
- Battery chargers for cellular phones
