NCP1217AD133R2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1217 |
| Pin Count | 8 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~16V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 133kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Duty Cycle | 46.5% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.8V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1217AD133R2 Overview
An embedded ac to dc converter is included in 8-SOIC (0.154, 3.90mm Width) package.The AC/DC power converter Tape & Reel (TR) is available for this product.It is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of 0°C~150°C TJ °C in order to achieve its full performance.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .When the switching frequency reaches 133kHz , the process is complete.This AC/DC converter is suitable for operation in the range of 7.6V~16V supply voltage (Vcc/Vdd).There are a total of 8 terminations in it.There are 8 pins on the ac/dc converter.The ac-dc converter has 8 pins.Surface Mount is a suitable mounting point for the ac dc converters.If you select the NCP1217 family, you will be able to search for similar acdc converters.AC to DC converter is included in Switching Regulator or Controllers .The output current is set to 500mA .
NCP1217AD133R2 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at 133kHz
With 8 pins
Output Current at 500mA
NCP1217AD133R2 Applications
There are a lot of ON Semiconductor NCP1217AD133R2 AC DC Converters applications.
- Low power ac?dc Adapters for Chargers
- Low-Voltage I/O System Power
- Power adapters for monitors
- Set Top Boxes (STB)
- RCC SMPS
- Battery chargers for cellular phones
- Air Conditioning
- Off--line Battery Charger
- AC/DC Adaptors/Chargers for E-books
- Linear Adapter Replacements
