NCP1217AP100
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 7 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | NCP1217 |
| Pin Count | 8 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 7.6V~16V |
| Input Voltage (Min) | 8.3V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.5A |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Duty Cycle | 46.5% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.8V |
| Height Seated (Max) | 4.45mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1217AP100 Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.The AC/DC power converter is available in Tube .As you can see, this AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of 0°C~150°C TJ in order to ensure its performance.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.The switching frequency reaches 100kHz .A range of 7.6V~16V supply voltages (Vcc/Vdd) can be used.It has a total of 7 terminations.There are 7 pins on this ac/dc converter.There are 8 pins on the ac-dc converter.Search similar acdc converters based on NCP1217 family members.The ac to dc conversions are contained in Switching Regulator or Controllers .An amount of current of 0.5A is the maximum that can be supplied to the ac to dc inverter.
NCP1217AP100 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
NCP1217AP100 Applications
There are a lot of ON Semiconductor NCP1217AP100 AC DC Converters applications.
- MP3
- Universal Off-Line Power Supplies
- Appliance Power Supplies
- Home Appliance Applications
- Lighting controls
- Automotive Telematics
- Shaver Charger
- Adapter for ADSL
- Vacuum Cleaner
- Switching AC-DC Charger
