Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
LIFETIME (Last Updated: 3 days ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm), 7 Leads |
Number of Pins |
7 |
Operating Temperature |
0°C~150°C TJ |
Packaging |
Tube |
Published |
2005 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Last Time Buy |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin (Sn) |
Subcategory |
Switching Regulator or Controllers |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
NCP1217 |
Pin Count |
7 |
JESD-30 Code |
R-PDIP-T8 |
Number of Outputs |
1 |
Input Voltage-Nom |
11V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Operating Supply Current |
1.02mA |
Output Current |
500mA |
Voltage - Supply (Vcc/Vdd) |
7.6V~16V |
Input Voltage (Min) |
8.3V |
Topology |
Flyback |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
100kHz |
Halogen Free |
Halogen Free |
Control Technique |
PULSE WIDTH MODULATION |
Rise Time |
60ns |
Fall Time (Typ) |
20 ns |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
No |
Fault Protection |
Over Load, Over Temperature, Short Circuit |
Max Duty Cycle |
50 % |
Duty Cycle |
46.5% |
Output Isolation |
Isolated |
Voltage - Start Up |
12.8V |
Height |
3.44mm |
Length |
10.16mm |
Width |
6.6mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
NCP1217AP100G Overview
8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.You can get it in AC/DC power converter Tube .In this case, the AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of 0°C~150°C TJ °C.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.100kHz is the switching frequency.A range of 7.6V~16V supply voltages (Vcc/Vdd) can be used.In total, it has 8 terminations.The ac/dc converter has a total of 7 pins.The pins of the ac-dc converter count up to 7 .The ac dc converters is suitable for mounting by Through Hole .The NCP1217 family can be used to search for similar acdc converters.A total of 1 outputs need to be run.The ac to dc conversions are included in Switching Regulator or Controllers .Currently, the output current is set to 500mA .
NCP1217AP100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
Output Current at 500mA
NCP1217AP100G Applications
There are a lot of ON Semiconductor NCP1217AP100G AC DC Converters applications.
- Home Appliance Applications
- Auxiliary Power Supply
- Industrial controls
- Power tools
- Battery chargers for cellular phones
- Small off-line low voltage power supplies
- Battery chargers for mobile devices with touchpad display
- Adapters
- Standby and Auxiliary Power Supplies
- AC/DC Adaptors/Chargers for Cordless Phone