NCP1217AP133
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | NCP1217 |
| Pin Count | 8 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~16V |
| Input Voltage (Min) | 8.3V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 133kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Duty Cycle | 46.5% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.8V |
| Height Seated (Max) | 4.45mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1217AP133 Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .There is a AC/DC power converter of Tube available.There is a mounting point for this AC/DC converter in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of 0°C~150°C TJ °C.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.133kHz is the switching frequency.Supply voltage (Vcc/Vdd) does not need to exceed 7.6V~16V .Total terminations are 7 .A ac/dc converter with 7 pins is available.The pins of the ac-dc converter count up to 8 .There are no problem mounting the ac dc converters by Through Hole .Similar acdc converters can be found using the NCP1217 family.Switching Regulator or Controllers contains the ac to dc conversions.The output current is set to 500mA .
NCP1217AP133 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 133kHz
With 7 pins
Output Current at 500mA
NCP1217AP133 Applications
There are a lot of ON Semiconductor NCP1217AP133 AC DC Converters applications.
- AC?DC USB chargers for Cell Phones
- Adapter/Charger for Cell
- Cellular phone chargers
- PDAs
- AC--DC Adapter
- USB-PD 2.0
- Automotive Clusters
- Standby power supplies for TV
- Auxiliary Power Supplies
- Power Adaptors
