NCP1217AP133G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | NCP1217 |
| Pin Count | 7 |
| JESD-30 Code | R-PDIP-T8 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~16V |
| Input Voltage (Min) | 8.3V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 133kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Duty Cycle | 46.5% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.8V |
| Height Seated (Max) | 4.45mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1217AP133G Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .It is available in Tube AC/DC power converter.Through Hole mounts this AC/DC converter.For the ac dc converter to perform properly, it should be operated at a temperature of 0°C~150°C TJ °C.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.As a result, the switching frequency reaches 133kHz .A range of 7.6V~16V supply voltages (Vcc/Vdd) can be used.There have been 8 terminations of this program.It contains 7 pins.The ac-dc converter has 7 pins.The ac dc converters are suitable to mount by Through Hole .You can search similar acdc converters based on NCP1217 family.The ac to dc conversions are contained in Switching Regulator or Controllers .500mA is set as the output current.
NCP1217AP133G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 133kHz
With 7 pins
Output Current at 500mA
NCP1217AP133G Applications
There are a lot of ON Semiconductor NCP1217AP133G AC DC Converters applications.
- MPS parts
- Replacements for bulky plug-in transformers
- Battery chargers for smart phones
- Laptops and personal digital assistants
- Power adapters for monitors
- Auxiliary Power Supply
- AC/DC Adaptors/Chargers for E-books
- Open Frame Switching Power Supply
- Utility meters
- Adaptors for DSCs
