NCP1217AP65
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | NCP1217 |
| Pin Count | 8 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~16V |
| Input Voltage (Min) | 8.3V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Duty Cycle | 46.5% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.8V |
| Height Seated (Max) | 4.45mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1217AP65 Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.There is a AC/DC power converter of Tube available.It is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of 0°C~150°C TJ °C in order for it to perform properly.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.As soon as the switching frequency reaches 65kHz , the circuit is closed.Supply voltage (Vcc/Vdd) does not need to exceed 7.6V~16V .As a result, it has a total of 7 terminations.On this ac/dc converter, there are 7 pins.There are 8 pins in the ac-dc converter.It is suitable for mounting by Through Hole .Based on the NCP1217 family, you can search for similar acdc converters.AC to DC converter is contained in Switching Regulator or Controllers .The output current is set to 500mA .
NCP1217AP65 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 65kHz
With 7 pins
Output Current at 500mA
NCP1217AP65 Applications
There are a lot of ON Semiconductor NCP1217AP65 AC DC Converters applications.
- Switching AC-DC Charger
- Portable audio
- Auxiliary Power Supplies
- Battery chargers for cordless
- Battery chargers for smart phones
- IoT Applications
- AC--DC Adapter
- Switching AC-DC Adapter
- Networking
- Power tools
