NCP1217AP65G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 65kHz |
| Base Part Number | NCP1217 |
| Pin Count | 7 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Output Voltage | 10V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.02mA |
| Output Current | 1.7mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~16V |
| Input Voltage (Min) | 8.3V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Max Duty Cycle | 50 % |
| Duty Cycle | 46.5% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.8V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1217AP65G Overview
In the package 8-DIP (0.300, 7.62mm), 7 Leads , the ac to dc converter is embedded.The ac dc converter is available in Tube case.This AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of 0°C~150°C TJ °C.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.A range of 7.6V~16V supply voltages (Vcc/Vdd) can be used.It has a total of 8 terminations.On this ac/dc converter, there are 7 pins.There are 7 pins in total.The ac dc converters are suitable for mounting by Through Hole .If you select the NCP1217 family, you will be able to search for similar acdc converters.Running 1 outputs is available.Switching Regulator or Controllers includes the ac to dc conversions.We are setting the output current to 1.7mA .In this AC to DC transformer, the output voltage is 10V .When operating at a frequency of 65kHz , AC to DC converter is capable of reaching high efficiency.
NCP1217AP65G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Output Current at 1.7mA
NCP1217AP65G Applications
There are a lot of ON Semiconductor NCP1217AP65G AC DC Converters applications.
- Chargers for cell/cordless phones
- Industrial controls
- Adapters for Handheld Electronics
- Standby power supplies for IR
- AC--DC Adapter
- Wall switches
- Switching AC-DC Charger
- Charger
- Appliance Power Supplies
- AC/DC Adaptors/Chargers for PDAs
