NCP1217D100R2G
| Parameters | |
|---|---|
| Base Part Number | NCP1217 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 10V |
| Output Type | Voltage |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~16V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Max Duty Cycle | 74 % |
| Duty Cycle | 74% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.8V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
NCP1217D100R2G Overview
8-SOIC (0.154, 3.90mm Width) is the package in which the ac to dc converter is embedded.There is a AC/DC power converter of Tape & Reel (TR) available.It is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of 0°C~150°C TJ °C in order to achieve its full performance.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.Vcc/Vdd can be used within the range of 7.6V~16V supply voltage.There are a total of 8 terminations.On the ac/dc converter, there are 8 pins.There are 8 pins on the ac-dc converter.The ac dc converters are suitable for mounting by Surface Mount .The NCP1217 family can be used to search for similar acdc converters.Running 1 outputs is available.The ac to dc conversions can be found in Switching Regulator or Controllers .There is 500mA output current set.There is 10V output voltage from this AC/DC converter.AC to DC converter is able to reach high efficiency when its frequency is 100kHz .Here is the standard for REACH SVHC : No SVHC .It uses Voltage as an output.
NCP1217D100R2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 500mA
Output Type : Voltage
NCP1217D100R2G Applications
There are a lot of ON Semiconductor NCP1217D100R2G AC DC Converters applications.
- Tablets
- Standby power
- Adapters for Handheld Electronics
- AC/DC Adaptors/Chargers for Cell Phones
- Remotely-controlled appliances
- Power tools fast chargers with trickle and on/off
- AC/DC LED Driver applications
- Battery chargers for cordless
- AC?DC USB chargers for Tablets
- Appliance Power Supplies
