NCP1230D100R2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 702mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1230 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7.7V~18V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 15 ns |
| Nominal Input Voltage | 13V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 80 % |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.6V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1230D100R2G Overview
It is embedded in package 8-SOIC (0.154, 3.90mm Width) .You can get it in AC/DC power converter Tape & Reel (TR) .Surface Mount mounts this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of -40°C~125°C TJ degrees Celsius.The AC DC converter uses a type SWITCHING CONTROLLER analog integrated circuit.A range of 7.7V~18V supply voltages (Vcc/Vdd) can be used.A total of 8 terminations have been recorded.There are 8 pins on the ac/dc converter.The pins of the ac-dc converter total to 8 .There are no problem mounting the ac dc converters by Surface Mount .Search similar acdc converters based on NCP1230 family members.There are 1 outputs to be run.The ac to dc conversions are contained in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 500mA .There is 18V output voltage from this AC/DC converter.When operating at a frequency of 100kHz , AC to DC converter is capable of reaching high efficiency.Here is the standard for REACH SVHC : No SVHC .As a result of using this ACDC converter, PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE can also be detected.
NCP1230D100R2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 500mA
NCP1230D100R2G Applications
There are a lot of ON Semiconductor NCP1230D100R2G AC DC Converters applications.
- Battery chargers for smart phones
- Industrial controls
- MP3
- Low-Voltage I/O System Power
- Auxiliary Power Supply
- Standby power
- Rice Cooker
- Power adapters for network devices
- Low power ac?dc Adapters for Chargers
- Portable Apparatus
