NCP1230P100
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1230 |
| Pin Count | 7 |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 7.7V~18V |
| Input Voltage (Min) | 8.4V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.5A |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.6V |
| Height Seated (Max) | 4.45mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1230P100 Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.There is a AC/DC power converter of Tube available.As you can see, this AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~125°C TJ °C.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.As a result, the switching frequency reaches 100kHz .This AC/DC converter is designed for use within the range of 7.7V~18V supply voltage (Vcc/Vdd).In total, it has 7 terminations.On the ac/dc converter, there are 7 pins.There are 7 pins in the ac-dc converter.Based on the NCP1230 family, you can search for similar acdc converters.The ac to dc conversions are included in Switching Regulator or Controllers .An amount of current of 0.5A is the maximum that can be supplied to the ac to dc inverter.Using this ACDC converter, PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE is also accessible.
NCP1230P100 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
NCP1230P100 Applications
There are a lot of ON Semiconductor NCP1230P100 AC DC Converters applications.
- Networking
- Dimmers
- Tablets
- LED lights
- AC?DC USB chargers for Cameras
- Adapter/Charger for Cell
- Standby Power Supplies
- Chargers for cell/cordless phones
- Switching AC-DC Adapter
- Automotive Clusters
