NCP1230P100G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 10 hours ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1230 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 800mA |
| Voltage - Supply (Vcc/Vdd) | 7.7V~18V |
| Input Voltage (Min) | 8.4V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 80 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.6V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1230P100G Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .You can get it in AC/DC power converter Tube .As you can see, this AC/DC converter is mounted in the way of Through Hole .The ac dc converter needs to be operated at -40°C~125°C TJ °C in order to perform.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.At this point, the switching frequency reaches 100kHz .This AC/DC converter is designed for use within the range of 7.7V~18V supply voltage (Vcc/Vdd).There are a total of 7 terminations in it.There are 7 pins on this ac/dc converter.The pins of the ac-dc converter count up to 7 .Suitable mounting is provided by Through Hole .Based on the NCP1230 family, you can search for similar acdc converters.There are 1 outputs to be processed.The ac to dc conversions are included in Switching Regulator or Controllers .Current output is set to 800mA .It produces a voltage of 18V .Additionally, PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE can be discovered using this ACDC converter.
NCP1230P100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
Output Current at 800mA
NCP1230P100G Applications
There are a lot of ON Semiconductor NCP1230P100G AC DC Converters applications.
- Power adapters for monitors
- White goods
- Switching AC-DC Charger
- Standby Power Supplies
- Set Top Boxes (STB)
- Battery chargers for cordless
- LED lights
- Adapter/Charger for Cordless Phones
- LED Driver
- Air Conditioning
