Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE, NOT REC (Last Updated: 1 week ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm), 7 Leads |
Number of Pins |
7 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
Published |
2005 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin (Sn) |
Additional Feature |
PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE |
Subcategory |
Switching Regulator or Controllers |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Frequency |
133kHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
NCP1230 |
Pin Count |
7 |
Number of Outputs |
1 |
Output Voltage |
18V |
Input Voltage-Nom |
13V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Output Current |
800mA |
Voltage - Supply (Vcc/Vdd) |
7.7V~18V |
Topology |
Flyback |
Control Mode |
CURRENT-MODE |
Halogen Free |
Halogen Free |
Control Technique |
PULSE WIDTH MODULATION |
Rise Time |
40ns |
Fall Time (Typ) |
15 ns |
Nominal Input Voltage |
18V |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
No |
Fault Protection |
Current Limiting, Over Temperature, Over Voltage, Short Circuit |
Max Duty Cycle |
80 % |
Duty Cycle |
80% |
Output Isolation |
Isolated |
Voltage - Start Up |
12.6V |
Height Seated (Max) |
4.45mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
NCP1230P133G Overview
This ac to dc converter is included in the package 8-DIP (0.300, 7.62mm), 7 Leads .The AC/DC power converter type is Tube .Through Hole is mounted in the way of this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of -40°C~125°C TJ degrees Celsius.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.A range of 7.7V~18V supply voltages (Vcc/Vdd) can be used.As a result, it has had 7 terminations.In this ac/dc converter, there are 7 pins.The ac-dc converter has 7 pins.It are possible to mount thare ac dc converters by Through Hole .The NCP1230 family allows you to search for similar acdc converters.The number of outputs to run is 1 .The ac to dc conversions are contained in Switching Regulator or Controllers .Currently, the output current is set to 800mA .The output voltage of the AC/DC converter is 18V .This power AC DC is capable of reaching high efficiency when operating at a frequency of 133kHz .It is also possible to discover PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE when using this ACDC converter.
NCP1230P133G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Output Current at 800mA
NCP1230P133G Applications
There are a lot of ON Semiconductor NCP1230P133G AC DC Converters applications.
- Power tools fast chargers with trickle and on/off
- Set -Top Box (STB) Power Supply
- Remotely-controlled appliances
- MPS parts
- 3.3V power supplies
- Air conditioners
- Battery Chargers
- AC?DC USB chargers for Cell Phones
- AC-DC Output Power Conversion Applications
- Adapter/Charger for Cordless Phones