NCP1234AD100R2G
| Parameters | |
|---|---|
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Pin Count | 7 |
| Output Voltage | 20V |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 9.5V~28V |
| Input Voltage (Min) | 10.5V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 70 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Over Temperature |
| Max Duty Cycle | 85 % |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
NCP1234AD100R2G Overview
This ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width), 7 Leads .There is a AC/DC power converter of Tape & Reel (TR) available.This AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.At this point, the switching frequency reaches 100kHz .The voltage range of the supply can be set to 9.5V~28V (Vcc/Vdd).There have been 7 terminations of this program.In this ac/dc converter, there are 7 pins.There are a total of 7 pins on the ac-dc converter.It are possible to mount thare ac dc converters by Surface Mount .There are a ac to dc conversions included in Switching Regulator or Controllers .AC to DC converter is set to 500mA for the output current.Its output voltage is20V .When the supply voltage is 28V , the interface IC may conduct.
NCP1234AD100R2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 100kHz
With 7 pins
Output Current at 500mA
Operating Supply Voltage at the range of 28V
NCP1234AD100R2G Applications
There are a lot of ON Semiconductor NCP1234AD100R2G AC DC Converters applications.
- Automotive Telematics
- Adapter/Charger for Cordless Phones
- Open Frame Switching Power Supply
- Low-Voltage I/O System Power
- Adapter/Charger for Cell
- LED Driver
- Wall switches
- AC/DC Adaptors/Chargers for Cordless Phone
- MP3
- Standby Power Supplies
