NCP1250BSN100T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Voltage | 28.3V |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 15μA |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 8.8V~28V |
| Input Voltage (Min) | 9.4V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 30 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Power, Over Voltage, Short Circuit |
| Max Duty Cycle | 84 % |
| Isolation | Non-Isolated |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Start Up | 18V |
| Height | 1mm |
| Length | 3.1mm |
| Width | 1.7mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1250BSN100T1G Overview
This ac to dc converter is embedded in package SOT-23-6 Thin, TSOT-23-6 .The AC/DC power converter is available in Tape & Reel (TR) .Surface Mount is mounted in the way of this AC/DC converter.To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~125°C TJ .SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.When the switching frequency reaches 100kHz , the circuit is closed.It can be used within the range of 8.8V~28V supply voltage (Vcc/Vdd).There are a total of 6 terminations in it.There are 6 pins on this ac/dc converter.In this ac-dc converter, there are 6 pins.It are possible to mount thare ac dc converters by Surface Mount .In this AC to DC transformer, there are 1 outputs to run.There are a ac to dc conversions included in Switching Regulator or Controllers .It has been set to 500mA for the output current.There is 28.3V voltage output from it.Interface ICs conduct when the supply voltage is 28V .
NCP1250BSN100T1G Features
Packaged with SOT-23-6 Thin, TSOT-23-6
Switching Frequency at 100kHz
With 6 pins
Output Current at 500mA
Operating Supply Voltage at the range of 28V
NCP1250BSN100T1G Applications
There are a lot of ON Semiconductor NCP1250BSN100T1G AC DC Converters applications.
- MPS parts
- Wall switches
- Smartphones
- Battery chargers for cellular phones
- Automotive Infotainment
- AC/DC Adaptors/Chargers for Cordless Phone
- RCC SMPS
- Standby power supplies for TV
- IoT Applications
- AC?DC USB chargers for Tablets
