NCP1251ASN100T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Pin Count | 6 |
| Output Voltage | 28.3V |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 8.8V~28V |
| Input Voltage (Min) | 9.4V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 30 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Power, Over Voltage, Short Circuit |
| Max Duty Cycle | 84 % |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Start Up | 18V |
| Height | 1mm |
| Length | 3.1mm |
| Width | 1.7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1251ASN100T1G Overview
In the SOT-23-6 Thin, TSOT-23-6 package, the ac to dc converter is embedded.You can get it in AC/DC power converter Tape & Reel (TR) .It is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~125°C TJ °C.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.As soon as the switching frequency reaches 100kHz , the circuit is closed.Supply voltage (Vcc/Vdd) does not need to exceed 8.8V~28V .There are a total of 6 terminations in it.There are 6 pins on the ac/dc converter.There are a total of 6 pins on the ac-dc converter.Surface Mount is the recommended mounting method for the ac dc converters.AC to DC converter is included in Switching Regulator or Controllers .The output current is set to 500mA .The output voltage of the AC/DC converter is 28.3V .It is possible for the interface IC to conduct when the supply voltage is 28V .
NCP1251ASN100T1G Features
Packaged with SOT-23-6 Thin, TSOT-23-6
Switching Frequency at 100kHz
With 6 pins
Output Current at 500mA
Operating Supply Voltage at the range of 28V
NCP1251ASN100T1G Applications
There are a lot of ON Semiconductor NCP1251ASN100T1G AC DC Converters applications.
- White goods
- Replaces linear transformers
- AC?DC USB chargers for Tablets
- ATX/BTX Auxiliary Power
- Home appliances
- Auxiliary Power Supplies
- Adaptors for DSCs
- WiFi Wireless
- Set Top Boxes (STB)
- Off--line Battery Charger
