NCP1253ASN65T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Weight | 19.986414mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 15μA |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 8.8V~28V |
| Input Voltage (Min) | 9.4V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 30 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Voltage, Short Circuit |
| Max Duty Cycle | 84 % |
| Isolation | Non-Isolated |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Start Up | 18V |
| Height | 1mm |
| Length | 3mm |
| Width | 1.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1253ASN65T1G Overview
SOT-23-6 Thin, TSOT-23-6 is the package in which the ac to dc converter is embedded.The AC/DC power converter is available in Tape & Reel (TR) .There is a AC/DC converter mounted in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~125°C TJ °C in order to perform.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.There is 65kHz switching frequency.It can be used within the range of 8.8V~28V supply voltage (Vcc/Vdd).In total, it has 6 terminations.There are 6 pins on this ac/dc converter.In this ac-dc converter, there are 6 pins.Surface Mount is the recommended mounting method for the ac dc converters.In this AC to DC transformer, there are 1 outputs to run.The ac to dc conversions can be found in Switching Regulator or Controllers .AC to DC converter is set to 500mA for the output current.As soon as the supply voltage drops to 28V , the interface IC conducts.
NCP1253ASN65T1G Features
Packaged with SOT-23-6 Thin, TSOT-23-6
Switching Frequency at 65kHz
With 6 pins
Output Current at 500mA
Operating Supply Voltage at the range of 28V
NCP1253ASN65T1G Applications
There are a lot of ON Semiconductor NCP1253ASN65T1G AC DC Converters applications.
- Networking
- Standby power
- Laptops
- Lighting controls
- Standby power supplies for IR
- Chargers for cell/cordless phones
- Power Adaptors
- Power adapters for monitors
- Power tools fast chargers with trickle and on/off
- Adapters for Handheld Electronics
