NCP1271D100R2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Weight | 254.011727mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | Soft-Skip™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 100mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 65kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1271 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Max Output Current | 800mA |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 100mA |
| Power Dissipation | 100mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 10V~20V |
| Max Supply Current | 3.5mA |
| Max Output Voltage | 20V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 20V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 30ns |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 14V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Over Voltage, Short Circuit |
| Max Duty Cycle | 80 % |
| Input Current | 100mA |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.6V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1271D100R2G Overview
In the 8-SOIC (0.154, 3.90mm Width), 7 Leads package, the ac to dc converter is embedded.Tape & Reel (TR) case is available for the ac dc converter.As you can see, this AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~125°C TJ °C.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.There is 100kHz switching frequency.This AC/DC converter is suitable for operation in the range of 10V~20V supply voltage (Vcc/Vdd).In total, there are 7 terminations.On the ac/dc converter, there are 7 pins.In this ac-dc converter, there are 7 pins.There are no problem mounting the ac dc converters by Surface Mount .It belongs to a manufacturer family of Soft-Skip? .Similar acdc converters can be found using the NCP1271 family.A total of 1 outputs are available for processing.AC to DC converter is contained in Switching Regulator or Controllers .Current output is set to 500mA .In this AC to DC transformer, the output voltage is 20V .AC to DC converter reaches high efficiency when operated at a frequency of 65kHz .You are able to read the REACH SVHC standard at: No SVHC .The AC to DC converter can be powered under 20V voltage.The maximum supply current is 3.5mA .
NCP1271D100R2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 100kHz
With 7 pins
Output Current at 500mA
NCP1271D100R2G Applications
There are a lot of ON Semiconductor NCP1271D100R2G AC DC Converters applications.
- ATX/BTX Auxiliary Power
- Automotive Telematics
- Standby Power Supply
- ZigBee
- Battery chargers for smart phones
- USB type-c v1.2 chargers with optional VDM
- Auxiliary Power Supply
- Wireless System
- Air conditioners
- Rice Cooker
